An attractive, sturdy and waterproof aluminum 24V LED floodlight including a junction box with a seal around the cover, a watertight gland for the cable (2 meter included) and stainless steel bracket and screws. This flood light is reverse polarity enabled so you can connect positive to either wire. 99 bright white LEDs give a focused light (30 degree beam angle) for outdoor illumination and use only 6.5 watts of power. Most people can still read a newspaper 115 feet (34.5m) from this LED flood light. Great for yard, deck or dock lighting.

Voltage: 22-30 Volts DC
Watts: 6.5
Amps: 0.27
Lumens: 520
Dimensions: (5 W x 4 3/8 H x 5 3/8 D inches) (12.5 x 11 x 13.5 cm)
Beam Angle Width: Covers 0.55 times the distance (from the light, to the object being lit).
For more information on our LED fixtures click here.

This LED floodlight is perfect if you want a very wide beam angle, as the beam it casts is roughly 120 degrees. Producing 800 lumens of bright light, this flood light uses only 10 watts! Due to its wide beam, it is most suitable when not too far from the area needing to be lit. This flood light has a waterproof junction box and cable gland which make it a perfect option for outdoor use, and comes with over 6 feet (2m) of cable. It uses a single high quality LED from a major Taiwanese supplier, which makes this light a steal for its low price! The housing is aluminum, the screws are all stainless steel, and the bracket is steel. 

Voltage: 22-30 Volts DC
Watts: 10
Amps: 0.4
Colour Temperature: 4500-5000k
Unit Efficiency: >91%
Lighting Source: 1 pc of bridgelux SMD CHIP
CRI: Ra >80
Working Temperature: -40C ~ +55C
IP Grade: IP65
Life Span: > 50,000 Hours
Weight: 1.1 kg
Lumens: 80lm/W, 800
Dimensions: (4.5 W x 3.5 H x 4.25 L inches) (11.43 x 8.9 x 10.8 cm). 
Beam Angle Width: Covers 2.8 times the distance (from the light, to the object being lit).
For more information on our LED fixtures click here.

This LED floodlight is perfect if you want a very wide beam angle, as the beam it casts is roughly 120 degrees. Producing 800 lumens of bright light, this flood light uses only 10 watts! Due to its wide beam, it is most suitable when not too far from the area needing to be lit. This flood light has a waterproof junction box and cable gland which make it a perfect option for outdoor use, and comes with over 6 feet (2m) of cable. It uses a single high quality LED from a major Taiwanese supplier, which makes this light a steal for its low price! The housing is aluminum, the screws and bracket are all stainless steel. 

Voltage: 22-30 Volts DC
Watts: 10
Amps: 0.4
IP Grade: IP65
Life Span: > 40,000 Hours
Weight: 1.1 kg
Lumens: 80lm/W, 800
Dimensions: (4.5 W x 3.5 H x 4.25 L inches) (11.43 x 8.9 x 10.8 cm). 
Beam Angle Width: Covers 2.8 times the distance (from the light, to the object being lit).
For more information on our LED fixtures click here.

I know what you're thinking right now. "Ok, what's wrong with it..." And the truth is, nothing!  We're replacing these LED lights with a 40 watt version, and are trying to move out this older inventory. Take advantage of this massive steal! 

*Also available in 60 or 116X44 Degree Beam Angle*   This LED flood light and driver are all ETL certified! If you are looking for a rugged, efficient, and attractive LED flood light, this is the one for you! This is the ultimate weather-proof LED flood light fixture for a lane, parking area, path or arena. The 36 one watt Cree LED's are extremely efficient, giving over 100 lumens per watt and are cooled by an ingenious heat sink.. This LED flood light gives up to 4000 lumens using just 36 watts of power!! At a height of 12 feet (4m) the light coverage on the ground is 35 ft (11m) X 35 ft (11m), and the flood light will allow most people to easily read a newspaper in this area.

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights, the possible power saving is surprisingly large. This combination of extremely high lumens per watt (100+ lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself!

Voltage: 22-30 Volts DC
Watts: 36
Amps: 1.5
Lumens: 3780
Dimensions: 17.25 X 9.25 X 14 inches,  44 X 23.5 X 14 cm
Beam Angle: 120 Degrees (Please contact us if 60 Degree Beam Angle is preferred)
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129

I know what you're thinking right now. "Ok, what's wrong with them..." And the truth is, nothing! We're now stocking a newer version of this LED light, and are trying to move out the older inventory. Take advantage of this massive steal!  

*Also available in 60 or 116X44 Degree Beam Angle*  This LED flood light and driver are both ETL certified! This 24V DC LED flood light uses very efficient Cree LEDs, emitting over 100 lumens per watt, so this light gives up to 5300 lumens. It is amazing how much light this LED flood light gives for only 50 watts! At a height of 12 feet (4m) the light coverage on the ground is 35 ft (11m) X 35 ft (11m), and the LED flood light will allow most people to easily read a phone book in this area. The aluminum body has a pleasant hi tech shape and is extremely rugged and entirely weather proof. The 50 one watt LEDs are cooled by an ingenious heat sink.

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights the possible power saving is surprisingly large. This combination of extremely high lumens per watt (100+ lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself!

Voltage 23-30VDC
Watts: 50
Amps: 2.08
Lumens: 5000+
Dimensions: 43.2 x 23.5 x 15.2 with bracket extended (cm) 17 x 9.25 x 6 with bracket extended (inches)
Beam Angle: 120 degrees 
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129

*A variety of beam angles are available*   This LED floodlight is ETL Approved! This industrial quality LED flood light has a rugged aluminum housing that is purpose-designed for LED's. The LED board directly contacts the heat sink of the housing ensuring excellent thermal characteristics. Using only 0.8 amps at 24 volts DC, this LED floodlight gives over 2400 lumens. At a height of 15 feet (4.5m) the light coverage on the ground is 40 ft (12m) X 40 ft (12m), and the street light will allow most people to read a newspaper in this area. If you need a LED flood light that is reliable, needs no maintenance, has low power consumption and is ETL approved, then this is the LED flood light for you! 

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with all of our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights, the possible power saving is surprisingly large. This combination of extremely high lumens per watt (120 lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself!

A wide variety of beam angles and lighting shapes are available by adding lenses to the individual LEDs (30, 38 or 60 degrees, or create an oval or rectangular lighting pattern, for example). An additional charge of $41 will apply. Please contact us for more details.

Voltage: 23-30 Volts DC
Watts: 20
Amps: 0.8.5
Lumens: 2400+
Dimensions: With bracket extended  (cm) 14 x 9.25 x 6 (inches)
Beam Angle: 115 Degrees
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129

*A variety of beam angles are available*   This LED floodlight is ETL Approved! This industrial quality LED flood light has a rugged aluminum housing that is purpose-designed for LED's. The LED board directly contacts the heat sink of the housing ensuring excellent thermal characteristics. Using only 2.5 amps at 12 volts DC, this LED floodlight gives over 3600 lumens. At a height of 20 feet (6m) the light coverage on the ground is 50 ft (15m) X 50 ft (15m), and the street light will allow most people to read a newspaper in this area.  If you need a LED flood light that is reliable, needs no maintenance, has low power consumption and is ETL approved, then this is the LED flood light for you! 

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with all of our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights, the possible power saving is surprisingly large. This combination of extremely high lumens per watt (120 lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself!

A wide variety of beam angles and lighting shapes are available by adding lenses to the individual LEDs (30, 38 or 60 degrees, or create an oval or rectangular lighting pattern, for example). An additional charge of $61 will apply. Please contact us for more details.

Voltage: 23-30 Volts DC
Watts: 30
Amps: 1.25
Lumens: 3600+
Dimensions: With bracket extended  (cm) 14 x 9.25 x 6 (inches)
Beam Angle: 115 Degrees
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129

*A variety of beam angles are available*  This LED flood light and driver are all ETL certified! If you are looking for a rugged, efficient, and attractive LED flood light, this is the one for you! This is the ultimate weather-proof LED flood light fixture for a lane, parking area, path or arena. The 40 one watt Cree LED's are extremely efficient, giving over 120 lumens per watt and are cooled by an ingenious heat sink.. This LED flood light gives almost 5000 lumens using just 40 watts of power!! At a height of 25 feet (7.5m) the light coverage on the ground is 65 ft (20m) X 65 ft (20m), and the flood light will allow most people to read a newspaper in this area.

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights the possible power saving is surprisingly large. This combination of extremely high lumens per watt (120 lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself! 

A wide variety of beam angles and lighting shapes are available by adding lenses to the individual LEDs (30, 38 or 60 degrees, or create an oval or rectangular lighting pattern, for example). An additional charge of $82 will apply. Please contact us for more details.

Voltage: 23-30 Volts DC
Watts: 40
Amps: 1.7
Lumens: 4800
Dimensions: 14 X 9.25 X 14 inches,   cm
Beam Angle: 115 Degrees 
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129

*A variety of beam angles are available*   This LED flood light and driver are both ETL certified! This 24V DC LED flood light uses very efficient Cree LEDs, emitting over 120 lumens per watt, so this light gives up to 6000 lumens! These are our brightest LED's yet! At a height of 30 feet (9m) the light coverage on the ground is 75 ft (23m) X 75 ft (23m), and the LED flood light will allow most people to easily read a phone book in this area. The aluminum body has a pleasant hi tech shape and is extremely rugged and entirely weather proof. The 50 one watt LEDs are cooled by an ingenious heat sink.

You can use your own controller, or you can purchase one from our 'Solar/Light Controllers' page. This floodlight works with our 24 VDC 'ICOS" controllers. These LED flood lights are especially suited to solar power systems due to their extremely high light output and their ability to be dimmed during part of the night. When one of our dimming controllers (sku of SC-L) is used with these LED floodlights, the possible power saving is surprisingly large. This combination of extremely high lumens per watt (120 lu/watt) plus dimming, can reduce your winter solar array and battery bank sizing such that the light has paid for itself!

A wide variety of beam angles and lighting shapes are available by adding lenses to the individual LEDs (30, 38 or 60 degrees, or create an oval or rectangular lighting pattern, for example). An additional charge of $104 will apply. Please contact us for more details.

Voltage: 23-30 Volts DC
Watts: 50
Amps: 2.1
Lumens: 6000+
Dimensions: with bracket extended (cm) 14 x 9.25 x 6 with bracket extended (inches)
Beam Angle: 115 degrees
For more information on our LED fixtures click here.

CONTACT US FOR PRICING    250-286-6129